sleep timer not work with internal hdd or extenal (in usb)? sorry for my english
↧
[ET9x00] sleep timer
↧
gigablue openvix epg
Hi guys
I'm using a single sat and twin cable on hd quad. The problem I have is the epg. Takes about 30 minutes to download using crossepg. Can't figure out why? Anyone else had this problem? My edision os mini on vix downloads epg in a few minutes.
I'm using a single sat and twin cable on hd quad. The problem I have is the epg. Takes about 30 minutes to download using crossepg. Can't figure out why? Anyone else had this problem? My edision os mini on vix downloads epg in a few minutes.
↧
↧
how can i tell if my box has a cable tuner
hi
my box has triple tuners, can you tell me if any is good for connecting up to a vm feed.
my first tuner shows as
tuner A DVB-T2 ( switchable tuner types (DVB-T2, DVB-C )
tuner B DVB-S2
tuner C DVB-S2
I assume i can connect it via tuner A but if so how as the connection is just the old type of plug in connection youused to use for standard house ariel,
20170117_130643.jpg
my box has triple tuners, can you tell me if any is good for connecting up to a vm feed.
my first tuner shows as
tuner A DVB-T2 ( switchable tuner types (DVB-T2, DVB-C )
tuner B DVB-S2
tuner C DVB-S2
I assume i can connect it via tuner A but if so how as the connection is just the old type of plug in connection youused to use for standard house ariel,
20170117_130643.jpg
↧
Diseqc Switch / Mutliswitch
Hello All,
As we go through satlelite life learning new things (new to me definitely old to some / most of you) you think how this could benefit me.... Now here goes.
In my backroom I have feeds from 3 LNBs.
2 x feeds from a static Sky dish
1 x feed from a 1m dish with a motor
In my house I have 2 STBs and 1 TV which utilise these feeds. As below
2 x feeds into my ET8500 (1 from the sly dish and 1 x feed from the motorised dish)
1 x feed direct into my TV which has Freesat
1 x feed to my bedroom which is from the Loopout of the tuner on my ET8500
My question is this if I put the 3 feeds into a suitable switch, and had outputs to the various boxes would the switch then decide which is the best LNB to use for the service I'm watching?
And for all you professionals out there what would be the best way for me to set it up?
Thanks,
FP.
PS - I really dont know about Diseqc or Mulitswitches etc...
As we go through satlelite life learning new things (new to me definitely old to some / most of you) you think how this could benefit me.... Now here goes.
In my backroom I have feeds from 3 LNBs.
2 x feeds from a static Sky dish
1 x feed from a 1m dish with a motor
In my house I have 2 STBs and 1 TV which utilise these feeds. As below
2 x feeds into my ET8500 (1 from the sly dish and 1 x feed from the motorised dish)
1 x feed direct into my TV which has Freesat
1 x feed to my bedroom which is from the Loopout of the tuner on my ET8500
My question is this if I put the 3 feeds into a suitable switch, and had outputs to the various boxes would the switch then decide which is the best LNB to use for the service I'm watching?
And for all you professionals out there what would be the best way for me to set it up?
Thanks,
FP.
PS - I really dont know about Diseqc or Mulitswitches etc...
↧
catch up tv
I have narrowed my choice of receiver to the Edision Os mega, Mutant HD51, and the Octagon sf4008. I'm leaning towards the Edision
Generally do these have catchup TV apps such as iplayer, I TV hub and the like installed
Thanks
Generally do these have catchup TV apps such as iplayer, I TV hub and the like installed
Thanks
↧
↧
Cable split 3 ways
Hello,
I need to split my cable feed three ways ( currently split 2 ways ). When I do this using a 3 way splitter the picture on on my edison mini dvb-c keeps pixelating ( Its fine on a two way split ). So I'm guessing the issue is signal due to the 3 way split. Is there any sort of booster I can use to rectify this ? Thanks in advance
Mark
I need to split my cable feed three ways ( currently split 2 ways ). When I do this using a 3 way splitter the picture on on my edison mini dvb-c keeps pixelating ( Its fine on a two way split ). So I'm guessing the issue is signal due to the 3 way split. Is there any sort of booster I can use to rectify this ? Thanks in advance
Mark
↧
Diseqc setup problem
I am using [Technomate TM-Nano-SE M2 PLUS 1x DVB-S/S2 1x DVB-C/T/T2] with openvix latest image. Got this recently & have been trying it's options for the last week.
I have 2 dishes aready fitted in the house - Large one pointing at 26E and the smaller one at 28E
The box was working great with only 26E LNB attached, however; I tried connecting the 28E using a diseqc switch but for some reason the box is not happy about it.
Not sure what's wrong
I've used diseqc switches before so I'd like to think I can set it up.
I am using TM-4S DiSEqC Switch with 28E going into LNB2 & 26E going into LNB4 and the output to my receiver.
TM4S__85311_zoom.png
I also looked up few videos on youtube on how to set up diseqc on enigma2 devices in case I am doing something wrong but the simple configuration below wouldn't work (tried all combinations of yes & no to options and other combination of 26E in ports A-D)
File_000(3).jpg
As soon as I press save here the box would go straight into this:
File_001.jpg
and it would be stuck here and not respond - even to cancel/red button - until I restart the box.
I left it at one point to see if it's doing something but over an hour later nothing changed.
I had to chose "automatic" because the only other option I am getting is 26E or "nothing connected" ..... for some reason I am not getting any option for 28E but when it starts scanning it recognizes this signal as 28E but freezes at this stage.
Tried another way of scanning 28E by setting up the satellite as a single LNB but it does not give me an option to choose 28E ..... only 26E & motorized options
File_004.jpg
I tried to chose the satellite under one of the options but all I am getting is 26E
File_005.jpg
I tried different settings under advanced configuration (as per youtube videos) - tried all combinations the four LNB numbers along with 4 different ports & nothing worked - just wasted a good chunk of the afternoon on my day off. I will try tomorrow to use the 28E alone without diseqc and see if there is a problem there.
It used to be much easier with my old technomate TM-5200 D with all the satellites listed .... could it be a bug in openvix image?
Do I need to download a file or something to list other satellites?
I wonder if using settings from other users such as Malimali or ciefp would help show both satellites - then I can work from there by removing the others.
Any help appreciated guys
I have 2 dishes aready fitted in the house - Large one pointing at 26E and the smaller one at 28E
The box was working great with only 26E LNB attached, however; I tried connecting the 28E using a diseqc switch but for some reason the box is not happy about it.
Not sure what's wrong
I've used diseqc switches before so I'd like to think I can set it up.
I am using TM-4S DiSEqC Switch with 28E going into LNB2 & 26E going into LNB4 and the output to my receiver.
TM4S__85311_zoom.png
I also looked up few videos on youtube on how to set up diseqc on enigma2 devices in case I am doing something wrong but the simple configuration below wouldn't work (tried all combinations of yes & no to options and other combination of 26E in ports A-D)
File_000(3).jpg
As soon as I press save here the box would go straight into this:
File_001.jpg
and it would be stuck here and not respond - even to cancel/red button - until I restart the box.
I left it at one point to see if it's doing something but over an hour later nothing changed.
I had to chose "automatic" because the only other option I am getting is 26E or "nothing connected" ..... for some reason I am not getting any option for 28E but when it starts scanning it recognizes this signal as 28E but freezes at this stage.
Tried another way of scanning 28E by setting up the satellite as a single LNB but it does not give me an option to choose 28E ..... only 26E & motorized options
File_004.jpg
I tried to chose the satellite under one of the options but all I am getting is 26E
File_005.jpg
I tried different settings under advanced configuration (as per youtube videos) - tried all combinations the four LNB numbers along with 4 different ports & nothing worked - just wasted a good chunk of the afternoon on my day off. I will try tomorrow to use the 28E alone without diseqc and see if there is a problem there.
It used to be much easier with my old technomate TM-5200 D with all the satellites listed .... could it be a bug in openvix image?
Do I need to download a file or something to list other satellites?
I wonder if using settings from other users such as Malimali or ciefp would help show both satellites - then I can work from there by removing the others.
Any help appreciated guys
↧
cable turner channel setup.
hi guys
i have got my box setup and running and managed to tune in sat channels. all is ok with that.
i am now attempting to tune in using my cable turner and connect to them channels.
i am having no luck at all though.
can anyone explain to me how i set it up and find the channels please. i am in birmingham west midlands if that info is needed.
thank you
i have got my box setup and running and managed to tune in sat channels. all is ok with that.
i am now attempting to tune in using my cable turner and connect to them channels.
i am having no luck at all though.
can anyone explain to me how i set it up and find the channels please. i am in birmingham west midlands if that info is needed.
thank you
↧
viewing newcmad or mccam
Where do I view these settings please? I'm about the upgrade openvix, would it over write them>
↧
↧
Vu duo2 Transcoding Issue. Annoying narration is on whilst watching on transcoding
Im trying to find out, if there was a way off turning off narration whilst watching on transcode. it works fine when streaming have no issues like that and has audio options to change that on a device. soon as i put my device on transcoding to watch on my device, i lose the options to choose audio. i would be really grateful if there was a solution to this because it annoys the hell out of me. aaaaaarrrrrgggggghhhhh ******** narration!
↧
Using Kodi on PC to stream content to E2 box?
Hi,
The KodiDirect plugin is very buggy and crashes a lot. So I'm wondering if there is some way to do the following:
Using Kodi on laptop stream content from web and play on laptop.
Set the Kodi interface to stream across my network to specific E2 device (E2 box IP address)
Using E2 receiver and plugin (e.g.VLC) view the streamed content coming from Kodi on the laptop.
I think this is possible using VLC to VKC (laptop to E2) but maybe I'm wrong and E2 receiver can only stream from a network file server.
Hopefully someone can advise?
The KodiDirect plugin is very buggy and crashes a lot. So I'm wondering if there is some way to do the following:
Using Kodi on laptop stream content from web and play on laptop.
Set the Kodi interface to stream across my network to specific E2 device (E2 box IP address)
Using E2 receiver and plugin (e.g.VLC) view the streamed content coming from Kodi on the laptop.
I think this is possible using VLC to VKC (laptop to E2) but maybe I'm wrong and E2 receiver can only stream from a network file server.
Hopefully someone can advise?
↧
[VU+ Duo2] Main Menu opening/closing randomly?
Experiencing some really strange behaviour, the "Main Menu" has suddenly started to open/close on it's own accord!
tried rebooting, updating to latest OpenVix version and even tried a 2nd Remote (as I thought the "Menu" button may be sticking), absoultely no difference!
I'm using the Blue-HD skin and I've haven't changed anything (knowingly) for several weeks - apart from my box being possessed by a Poltergeist, has anyone any ideas what's going on? I'm totally stumped what to try next!
many thanks
tried rebooting, updating to latest OpenVix version and even tried a 2nd Remote (as I thought the "Menu" button may be sticking), absoultely no difference!
I'm using the Blue-HD skin and I've haven't changed anything (knowingly) for several weeks - apart from my box being possessed by a Poltergeist, has anyone any ideas what's going on? I'm totally stumped what to try next!
many thanks
↧
new user
Hi all, ive been running a vu duo 1 for last few years no probs and have now purchased the vu uno 4k.
can someone please confirm thet oscam is working on this receiver using the latest vix image.
Regards
Echo
can someone please confirm thet oscam is working on this receiver using the latest vix image.
Regards
Echo
↧
↧
[VU+ Solo2] Flash Full & FTP broken - Image Upgrade Advice Required
Greetings.
I can usually find all the help and support I need on here without posting but this time I need help!
I not had many issues with my box and not done any updates for a while (if it's not broken don't fix it).
Problem is that FTP hasn't worked for a couple of weeks and the box has been crashing quite a lot this week due to the flash memory being full (4k free from 196MB) so today I have connected via telnet and found the crossepg.descriptors.db was 160MB so I have deleted it, added a USB drive and pointed EPG to that and re-downloaded and all is fine. I thought this would also resolve the ftp issue but it hasn't.
I go to menu > Setup > System > Network > FTP Setup and current status is stopped. Pressing the Green button for Enable does nothing.
Also if I go to download any plugins or software update it says it's not connected to the internet but it is as I connect to it from work everyday.
As I can't find any fix for the FTP issue I'm thinking an update will resolve this issues but wanted to ask if there's any specific upgrade paths or goes update to the latest stable version?
Any help will be greatly received
Thanks
I can usually find all the help and support I need on here without posting but this time I need help!
I not had many issues with my box and not done any updates for a while (if it's not broken don't fix it).
Problem is that FTP hasn't worked for a couple of weeks and the box has been crashing quite a lot this week due to the flash memory being full (4k free from 196MB) so today I have connected via telnet and found the crossepg.descriptors.db was 160MB so I have deleted it, added a USB drive and pointed EPG to that and re-downloaded and all is fine. I thought this would also resolve the ftp issue but it hasn't.
I go to menu > Setup > System > Network > FTP Setup and current status is stopped. Pressing the Green button for Enable does nothing.
Also if I go to download any plugins or software update it says it's not connected to the internet but it is as I connect to it from work everyday.
As I can't find any fix for the FTP issue I'm thinking an update will resolve this issues but wanted to ask if there's any specific upgrade paths or goes update to the latest stable version?
Any help will be greatly received
Thanks
↧
[VU+ Duo2] Update and pluggins issue
Hi new to the forum. I have a vu+ duo box running build 4.1.016 when i try to update it comes up with an error message 'error - a background update check is i progress please wait a few minutes and try again' it gets stuck on this and I have to switch the box off at the plug to restart.
My other issue is on the pluggins. When I go to pluggins and press the green button to download it says 'downloading plugging information. Please wait for a few minutes' it then goes blank. It did come up with a error message and advised me to come to this site. So I've spent the evening looking on here.
Think I've found the solution and just need to update to build 23. By doing a couch install or something I read. Would this solve my problems? Or at least worth a try?
My other issue is on the pluggins. When I go to pluggins and press the green button to download it says 'downloading plugging information. Please wait for a few minutes' it then goes blank. It did come up with a error message and advised me to come to this site. So I've spent the evening looking on here.
Think I've found the solution and just need to update to build 23. By doing a couch install or something I read. Would this solve my problems? Or at least worth a try?
↧
Possibly Hacked box, Some Security help needed
My 1 year old Xtrend ET-10000 is occasionally misbehaving.
When it misbehaves, it's sending a Flood of outgoing traffic to an as yet undetermined destination; it looks like it's participating in a DoS attack. Small packets, very very high Packets per second. Which cripples my internet connection and no doubt isn't helping someone else's either.
The system does have a password for ssh/telnet but access via the web interface doesn't seem to require one, so if people are able to make an inbound connection to get at the box, it still seems feasible they've pwned it somehow.
When the box is sending a flood of traffic, mgcamd is using 100%+ CPU even though the box shouldn't be running a cam at all. I can terminate mgcamd which seems to stop the traffic but it seems to restart itself later.
The box has IPv6 Connectivity. I have tried to find out how to disable this, but so far have not. If someone's making an inbound connection, I've a feeling it must be IPv6, as it only has an RFC1918 v4 address, with no ports or anything mapped through the router. However, it's possibly that the connection for the seeming remote control is now being initiated from the inside on a cron job or something to let 3rd party in. I don't really know.
Help Wanted:
I would like to know, if people can tell me:
1. How to permanently disable IPv6 on the system. It doesn't need to be enabled. It's just a gaping security hole at the moment.
2. Are there any known exploits or particular known previous examples of this particular pattern of abuse that people are familiar with, and can direct me to a related discussion?
3. I probably should be reflashing the box at this point but I have never done this and don't really know how. But I'm familiar with Linux generally, and have reflashed android devices before so it isn't toooo daunting, I just need to know where to start, and if there are any special considerations to take into account when trying to clean up a system which may have been compromised.
When it misbehaves, it's sending a Flood of outgoing traffic to an as yet undetermined destination; it looks like it's participating in a DoS attack. Small packets, very very high Packets per second. Which cripples my internet connection and no doubt isn't helping someone else's either.
The system does have a password for ssh/telnet but access via the web interface doesn't seem to require one, so if people are able to make an inbound connection to get at the box, it still seems feasible they've pwned it somehow.
When the box is sending a flood of traffic, mgcamd is using 100%+ CPU even though the box shouldn't be running a cam at all. I can terminate mgcamd which seems to stop the traffic but it seems to restart itself later.
The box has IPv6 Connectivity. I have tried to find out how to disable this, but so far have not. If someone's making an inbound connection, I've a feeling it must be IPv6, as it only has an RFC1918 v4 address, with no ports or anything mapped through the router. However, it's possibly that the connection for the seeming remote control is now being initiated from the inside on a cron job or something to let 3rd party in. I don't really know.
Help Wanted:
I would like to know, if people can tell me:
1. How to permanently disable IPv6 on the system. It doesn't need to be enabled. It's just a gaping security hole at the moment.
2. Are there any known exploits or particular known previous examples of this particular pattern of abuse that people are familiar with, and can direct me to a related discussion?
3. I probably should be reflashing the box at this point but I have never done this and don't really know how. But I'm familiar with Linux generally, and have reflashed android devices before so it isn't toooo daunting, I just need to know where to start, and if there are any special considerations to take into account when trying to clean up a system which may have been compromised.
↧
Looking for DVB-C FBC Tuner
Hi, I am looking for solution to view and record different cable channels in DOU2.
Is there a recommended DVB-C tuner for that purpose?
In the new receivers the new tuners FCB tuners support multi actions on different channels with one tuner.
Any solution for DOU2?
Is there a recommended DVB-C tuner for that purpose?
In the new receivers the new tuners FCB tuners support multi actions on different channels with one tuner.
Any solution for DOU2?
↧
↧
[VU+ Solo2] volume buttons does't work for the RC
when using the volume buttons the volume bar on the screen does not show, and the volume itself does't react.any help for my solo2 with the last openvix :mad:
↧
[VU+ Duo] Vu duo stuck on start up.
Hello, got a vu duo that had a problem with no sound, i kept having to switch off and back on for the sound to work. So after having enough i reflashed the box, but now i cant get the image to load past the first loading screen. box is stuck saying vu duo and just loading image on tele screen, remote will not work at all but i can get telnet access from control center on laptop.
Any help and advise would be greatly appreciated. its driving me insane.
Any help and advise would be greatly appreciated. its driving me insane.
↧
What's special about the Kingston USB flash drives.
So I need to re-flash my Edision OS Mini Twin Sat as I can't do an online update due to a kernel conflict. In the guide it says to use a Kingston USB flash drive no bigger than 8GB.
Now I don't have a Kingston 8GB drive so wondering what's special about them? Don't want to brick my STB.
Sent from my iPhone using Tapatalk
Now I don't have a Kingston 8GB drive so wondering what's special about them? Don't want to brick my STB.
Sent from my iPhone using Tapatalk
↧