hi don't know any thing about iptv or box but can you watch iptv and record another programme on this box or any other box please thanks mial
↧
Mutant 51
↧
Hello, from Ireland and requesting help selecting box...
Hello,
I'm hoping to buy my first proper satellite box, so could do with some help deciding what I need to get.
Currently I have the old satellite dish that came with the house when we moved in.
So its a bit rusty and has a single LNB. But it works fine using the built in tuners in the LG TV.
I'm mainly unhappy with the non-integrated EPG.. saorview channels on one EPG and a rigmarole to switch over to the separate satellite channel EPG... heh..
Also, the recording facilities.. I can only record what I'm currently watchin...pain in the...
I'm in Ireland so I need a combo box I presume.. want to get the terrestrial channels (saorview ) and the UK channels off the freesat.
But most combo boxes seem to have two satellite tuners and only one terrestrial (T2 is it?) tuner..
I find that I'd want to record one terrestrial channel while watching another terrestrial one more often than I'd want to record a satellite channel..
(say if I leave the pro14 rugby recording while the missus uses the TV to watch eastenders)
So, first question, do I need to get a box with two terrestrial tuners ?
We used to have cable TV from Virgin Tv and we never had any hassle having a coupla different recordings going while watchin something else..
So I'd like to get back to that kind of flexibility..
Second Question.. does FBC give me that for sat channels?
I was looking at a Quad tuner like the Xtrend ET8500 but that seems to be out of production...
Now I'm looking at this maybe?
https://www.world-of-satellite.co.uk...mo4k-ultimo-4k
I'm not very clued in on all the technologies.. so if anyone can correct me I'd appreciate it..
But, that dual FBC tuner in slot 1 should allow me a lot of flexibility in recording of satellite channels... right?
And if I put a twin hybrid DVB-T2 in the 3rd slot then wouldn't I get what I want in the terrestrial recording area ?
(ie: watch one without interrupting recording of another?)
Just wondering if there is a cheaper option I'm overlooking?
Also, do I need a special LNB for the FBC tuner? Is it a dual LNB as well?
Thanks for any replies or advice...
PS, what is multistream and should I care?
I'm hoping to buy my first proper satellite box, so could do with some help deciding what I need to get.
Currently I have the old satellite dish that came with the house when we moved in.
So its a bit rusty and has a single LNB. But it works fine using the built in tuners in the LG TV.
I'm mainly unhappy with the non-integrated EPG.. saorview channels on one EPG and a rigmarole to switch over to the separate satellite channel EPG... heh..
Also, the recording facilities.. I can only record what I'm currently watchin...pain in the...
I'm in Ireland so I need a combo box I presume.. want to get the terrestrial channels (saorview ) and the UK channels off the freesat.
But most combo boxes seem to have two satellite tuners and only one terrestrial (T2 is it?) tuner..
I find that I'd want to record one terrestrial channel while watching another terrestrial one more often than I'd want to record a satellite channel..
(say if I leave the pro14 rugby recording while the missus uses the TV to watch eastenders)
So, first question, do I need to get a box with two terrestrial tuners ?
We used to have cable TV from Virgin Tv and we never had any hassle having a coupla different recordings going while watchin something else..
So I'd like to get back to that kind of flexibility..
Second Question.. does FBC give me that for sat channels?
I was looking at a Quad tuner like the Xtrend ET8500 but that seems to be out of production...
Now I'm looking at this maybe?
https://www.world-of-satellite.co.uk...mo4k-ultimo-4k
I'm not very clued in on all the technologies.. so if anyone can correct me I'd appreciate it..
But, that dual FBC tuner in slot 1 should allow me a lot of flexibility in recording of satellite channels... right?
And if I put a twin hybrid DVB-T2 in the 3rd slot then wouldn't I get what I want in the terrestrial recording area ?
(ie: watch one without interrupting recording of another?)
Just wondering if there is a cheaper option I'm overlooking?
Also, do I need a special LNB for the FBC tuner? Is it a dual LNB as well?
Thanks for any replies or advice...
PS, what is multistream and should I care?
↧
↧
[Mut@nt] HD51 Use of Left and Right arrows each side of OK
I have asked a question on the forum and not received any help or explanation from anyone as to why these buttons don't work the same as on my TM TM-Nano2 Super in playback mode, despite the fact that both are working with identical software. I have now tried various things, all to no effect. The basic issue is that I would like the Mutant's L and R buttons to work as REW and FF as per the Technomate. In addition to the re-flashing as above, I have tried using both the built in button reassignment facility and MQB, but neither seems to have the capability to program as required. If I use R arrow during playback on the HD51 I get a basically blank box in the centre of the screen but with the digit 5 inserted and highlighted towards the right hand side of the box. Exit removes it. On the TM I get FF by pressing R arrow.
As I said in my post on the forum, I can't understand why a different box, using the same software, works so differently.
Hope you can help with this, as the normal FF and REW buttons are tiny and shit, tucked away between other buttons and make the RC very hard to use.
As I said in my post on the forum, I can't understand why a different box, using the same software, works so differently.
Hope you can help with this, as the normal FF and REW buttons are tiny and shit, tucked away between other buttons and make the RC very hard to use.
↧
[For Sale] VU+ Ultimo 4K 1x DVB-C FBC Tuner, UHD 2160p , 1TB HD Installed
VU+ Ultimo 4K 1x DVB-C FBC Tuner, UHD 2160p , 1TB HD Installed
In excellent condition. Has 1x DVB-C FBC tuner
Installed with 1TB Hard Drive
Sale includes:
VU+ Ultimo 4K receiver
Original VU+ Remote
Original Box
1TB Hard Drive
1x DVB-C FBC Tuner
Reason for sale is due to the fact that I do not use this to its full potential. This is a high end receiver!!!! The receiver is in perfect working order!!!!
£420 + £10 postage
In excellent condition. Has 1x DVB-C FBC tuner
Installed with 1TB Hard Drive
Sale includes:
VU+ Ultimo 4K receiver
Original VU+ Remote
Original Box
1TB Hard Drive
1x DVB-C FBC Tuner
Reason for sale is due to the fact that I do not use this to its full potential. This is a high end receiver!!!! The receiver is in perfect working order!!!!
£420 + £10 postage
↧
openpli 6.2
don't know if this the right place for this post ?
just looking in openpli plugins don't see CrossEPGDownloader is it called something else
just looking in openpli plugins don't see CrossEPGDownloader is it called something else
↧
↧
[ABM-DVB-C] Cable tuner fails.
I have a vu duo 2 flashed to 5.1.033.
When running the abm is fails to find any of the cable channels.
I am in area 40988 Plymouth.
Failed to tune Virgin UK on tuner C.
Please check the following
The tuner is correctly configured.
You can receive the specified frequency.
The tuner is configured. I can do an auto scan and it finds all the channels. My issue is just with with the Abm scan.
When running the abm is fails to find any of the cable channels.
I am in area 40988 Plymouth.
Failed to tune Virgin UK on tuner C.
Please check the following
The tuner is correctly configured.
You can receive the specified frequency.
The tuner is configured. I can do an auto scan and it finds all the channels. My issue is just with with the Abm scan.
↧
[ET8500] Xtream Editor App Code 0
Hi All, Appreciate any help or guidance. I use Xtream Editor as my IPTV app. Recently I upgraded the app to 2.12.
After upgrade it stopped working as I cannot get an App code or QR code, it returns 0. Please see attached app.jpg.
I went to Xtream editor website and it states make sure parental control is enabled. So I enabled parental control in Open Vix 5.1.033 and then it worked for a number of days.
However today it has stopped working again. Parental control is enabled. One other thing that Xtream Editor website also states is Activate Multi-Bouquet.
2 Questions
1) Where do I activate Multi-Bouquet on OpenVix 5.1.033 ?
2) Anyone got any other ideas ?
Thanks for your help !
After upgrade it stopped working as I cannot get an App code or QR code, it returns 0. Please see attached app.jpg.
I went to Xtream editor website and it states make sure parental control is enabled. So I enabled parental control in Open Vix 5.1.033 and then it worked for a number of days.
However today it has stopped working again. Parental control is enabled. One other thing that Xtream Editor website also states is Activate Multi-Bouquet.
2 Questions
1) Where do I activate Multi-Bouquet on OpenVix 5.1.033 ?
2) Anyone got any other ideas ?
Thanks for your help !
↧
OpenViX 5.2 released!
OpenViX 5.2 is based on the OE-Alliance v4.2 core. You cannot perform an online update if you are currently on OpenViX 5.1.xxx or older.
You can download and then flash the new 5.2 image using Image Manager. You can still flash by USB if you prefer.
You can restore settings and plugins from OpenViX 5.1 series images after you have flashed the image. This will restore most things to how you had them before.
RESTORE PROCESS WILL NOT RESTORE PLUGINS THAT ARE NOT ON THE CURRENT PLUGIN SERVER. THESE MUST BE INSTALLED MANUALLY.
There are many guides to flash/restore. Here is another
http://www.world-of-satellite.com/sh...p-and-Restores
So what is different in OpenViX 5.2 then?
OpenViX 5.1 build 033 was the final build in the 5.1 series.
As with previous images, the main differences are core of the image or the OE (Open Embedded). This has undergone a lot of changes, updates and fixes. As a user you should not notice many differences between previous OpenViX 5.1 and OpenViX 5.2 (i.e. there are not many functional differences.)
Main OE Core changes
Based on Openembedded-Core Roko
The main packages and utilities have been updated:
Libc6
Openssh
Busybox
Samba
Openssl
Nfs Util
Dropbear
Bitbake
Gcc 6.3.0 Memleak fix
Known Image issues
Dreamplex - Some users in certain setup's may have issues.
Known Plugin/Receiver issues
Older receivers with lower amounts of memory struggle with downloading OpenTV EPG data using Cross EPG downloader. Use a swap file in such cases.
Some 3rd party plugins may not be currently compatible with OE-A 4.2x core, streaming plugins may require their respective author's to add dependencies for GST 1.xx.
HbbTV not working for all receivers. Please raise issue with respective Manufacturer.
Button Mappings
Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red ** & *** - Sort single EPG info when in channel list.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - Instant IMDB Database search on the current programme.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
Long Up/Down - Open PIP list on boxes that support PIP.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu
*** Can be turned off in ViX Menu
Special Thanks
- Rytec, doglover and all the teams that host EPG feeds for EPG Importer, for their continued support.
- All developers for their plugins used in the feeds of this image.
- All of the ViX Beta team for their hours of testing and dedication on improving the image.
- All those who have submitted patches/fixes
- To all who have submitted translation work for OpenViX.
- Huevos for his work on blindscan and ABM.
- Peter de Jonge, abu baniaz & Huevos for their work with Andyblac to improve ABM.
- Rob van der Does, rossi2000, abu baniaz and Huevos for OpenViX skins.
Receivers no longer supported in 5.2
Due to limited resources some end of life models will not be built in version 5.2. If you want to use OpenViX with these receivers please use version 5.1 or build version 5.2 yourself. The following is a list of the receivers not supported in version 5.2:
- Technomate TM-Single.
- Technomate TM-Nano-OE.
- Technomate TM-2T.
- TM-Nano-2T.
- Mutant 500C.
- Octagon SF8.
- Octagon XP1000+.
Receivers no longer supported in 5.0
Due to limited resources some end of life models will not be built in version 5.0. If you want to use OpenViX with these receivers please use version 4.2 or build version 5.0 yourself.
The following is a list of the receivers not supported in version 5.0:
- Gigablue SE Plus
- Gigablue UE Plus
- Golden Interstar LX1 & LX2
- Media Link Ixuss Zero
- Miraclebox Mini
- Opticum DVBC-1
- Spycat
- Venton HDx
- Xtrend ET4x00
- Xtrend ET5000
- Xtrend ET6x00
Receivers no longer supported in 4.0
Some receivers that lack resources (only have 333MHz CPU, insufficient flash, lack driver support, etc) will not be built in version 4.0. If you want to use OpenViX with these receivers please use version 3.2 or build version 4.0 yourself. The following is a list of the receivers not supported in version 4.0:
- GB Solo
- GB 800SE
- GB 800UE
- Mara M9
- Venton Unibox
- VU+ Solo
Translations:
If anyone is interested in doing any translation work for the plugins and the image itself, please see here
Image Downloads.
(Available via www.openvix.co.uk)
Reporting Issues
Please report any issues using these guidelines
http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section!
↧
[Mut@nt] HD51 OpenViX 5.2.001 Image Manager problem
Just installed 5.2.001 and Image Manager freezes on 'Backing up kernel... ' Progress is at 18/100
This is a clean install with no settings restore and running the basic setup wizard.
This is a clean install with no settings restore and running the basic setup wizard.
↧
↧
Octagon SX88+ enhanced firmware HERE
Octagon_sx88_plus_v1.04.72_20180815EU.
↧
OpenVIX or Enigma2 online emulator
Hi All,
Does anyone know if there's an OpenVIX or Enigma2 online emulator that lets you drive the gui and see what it's like? A bit like what a lot of router and nas companies do like this: https://www.tp-link.com/resources/si...tor/index.html
Also, is there a really good guide to getting started using OpenVIX that details setting timers, etc?
Cheers,
H.
Does anyone know if there's an OpenVIX or Enigma2 online emulator that lets you drive the gui and see what it's like? A bit like what a lot of router and nas companies do like this: https://www.tp-link.com/resources/si...tor/index.html
Also, is there a really good guide to getting started using OpenVIX that details setting timers, etc?
Cheers,
H.
↧
Mutant HD51 DVB-S2X tuners?
Good evening..I want buy Mutant HD51 and want ask which tuners buy? DVB-S2X both or mix DVB-S2X with DVB-S2?
I will use 1 tuner for 23.5 Skylink and 1 for 28.2E
Thanks in advance
I will use 1 tuner for 23.5 Skylink and 1 for 28.2E
Thanks in advance
↧
[VU+ Duo2] IPTVbouquet?
I have used IPTVbouquet before to convert m3u file to a bouquet but now I can not find the plugin under plugins. Has it been deleted? Does it not work anymore? Or should I use something else? If so, what?
Regards,
BTJ
Regards,
BTJ
↧
↧
name of active emu ?!
Hi guys ...
And body have python file such as (Emuname.py) to show noame of active emu on skin to Vix image ?!
or any skin have that feature ?
I have try to find it some thing like that but I can not find it >>>
Thank you
And body have python file such as (Emuname.py) to show noame of active emu on skin to Vix image ?!
or any skin have that feature ?
I have try to find it some thing like that but I can not find it >>>
Thank you
↧
[VU+ Duo2] Installing 5.2.001 - Plugins restore seems to be stuck/hung
Hi all,
Have just flashed from 5.1.033 to 5.2.001 using the image manager. I am at the point where it asked if I wanted to do a settings restore. I said yes to both settings and plugins. It has not been on the screen saying something along the lines of "Retrieving plugins please wait..." and has been on that screen for close to 40min now.
I can ssh into the system, but the /root/logs folder is empty. Lookin in /var/logs I see the following
root@vuduo2:/var/log# ls -l
-rw-r--r-- 1 root root 0 Sep 24 11:03 boot
-rw-r--r-- 1 root root 9807 Sep 24 11:03 dmesg
-rw-rw-r-- 1 root root 292 Sep 29 02:13 lastlog
-rw-r--r-- 1 root root 30054 Sep 29 02:30 messages
-rw-r--r-- 1 root root 36 Sep 29 01:28 postinstall.log
drwxr-xr-x 2 root root 40 Sep 24 11:03 samba
-rw-rw-r-- 1 root root 3456 Sep 29 02:17 wtmp
One thing I have noticed is the tz on the system is wrong, presumably in UTC. The messages file seems to mostly consist of the following
Sep 29 02:28:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:29:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:30:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:30:01 vuduo2 authpriv.info crond[3167]: pam_unix(crond:session): session opened for user root by (uid=0)
Sep 29 02:30:01 vuduo2 cron.info CROND[3168]: (root) CMD (/usr/bin/ntpdate-sync silent)
Sep 29 02:30:09 vuduo2 daemon.notice ntpdate[3172]: adjust time server 133.243.238.244 offset -0.047514 sec
Sep 29 02:30:09 vuduo2 authpriv.info CROND[3167]: pam_unix(crond:session): session closed for user root
Sep 29 02:31:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:32:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:33:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
ad the postinstall.log file only contains these 2 lines
adding crontab
Configuring ntpdate.
Had a look at what processes were running and the package installer was listed, but had <defunct> after it's name. Not entirely sure what that signifies though.
1249 ? 00:00:09 opkg <defunct>
Really couldn't find much else apart from a file called ExtraInstalledPlugins in /var/tmp. It consists of
root@vuduo2:/var/tmp# cat ExtraInstalledPlugins
enigma2-plugin-skins-OverlayHD
enigma2-plugin-extensions-youtube
enigma2-plugin-systemplugins-IanSavOpenViXFeed
enigma2-plugin-extensions-netspeedtest
enigma2-plugin-extensions-epgrefresh
enigma2-plugin-extensions-tsmedia
enigma2-plugin-extensions-seriesplugin
enigma2-plugin-extensions-openwebif-terminal
enigma2-plugin-extensions-openwebif-vxg
run-postinsts
Lastly I decided to see what network connections were active. There does not appear be any back to any OpenVix server(s).
root@vuduo2:/var/tmp# netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 320 vuduo2.bsod:ssh BSOD.bsod:50597 ESTABLISHED
tcp 0 0 :::8001 :::* LISTEN
tcp 0 0 :::8002 :::* LISTEN
tcp 0 0 localhost:4200 :::* LISTEN
tcp 0 0 :::http :::* LISTEN
tcp 0 0 :::ftp :::* LISTEN
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::telnet :::* LISTEN
udp 0 0 0.0.0.0:mdns 0.0.0.0:*
udp 0 0 0.0.0.0:hostmon 0.0.0.0:*
udp 0 0 0.0.0.0:60816 0.0.0.0:*
udp 0 0 :::dhcpv6-client :::*
udp 0 0 :::mdns :::*
udp 0 0 :::hostmon :::*
udp 0 0 :::57701 :::*
raw 0 0 ::%4788280:58 ::%4953664:* 58
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 783 /var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 3154 /tmp/.listen.camd.socket
unix 2 [ ACC ] STREAM LISTENING 3156 /tmp/.listen.ciplus.socket
unix 2 [ ACC ] STREAM LISTENING 3196 /tmp/hotplug.socket
unix 2 [ ACC ] STREAM LISTENING 1451 /tmp/nxserver_ipc
unix 2 [ ACC ] STREAM LISTENING 3256 /tmp/hotplug.socket
unix 7 [ ] DGRAM 1998 /dev/log
unix 2 [ ACC ] STREAM LISTENING 2027 /var/run/avahi-daemon/socket
unix 2 [ ] DGRAM 3214
unix 3 [ ] STREAM CONNECTED 2030 /var/run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 1817
unix 3 [ ] STREAM CONNECTED 2023
unix 3 [ ] STREAM CONNECTED 3153
unix 2 [ ] STREAM 1443
unix 3 [ ] STREAM CONNECTED 2065
unix 2 [ ] STREAM 1447
unix 2 [ ] DGRAM 2046
unix 3 [ ] STREAM CONNECTED 1818
unix 3 [ ] STREAM CONNECTED 2064 /var/run/dbus/system_bus_socket
unix 2 [ ] DGRAM 2370
unix 2 [ ] STREAM 1446
unix 2 [ ] STREAM 1442
unix 3 [ ] STREAM CONNECTED 2066 /tmp/nxserver_ipc
unix 2 [ ] STREAM 1450
unix 2 [ ] DGRAM 2020
unix 3 [ ] STREAM CONNECTED 3383
unix 2 [ ] STREAM 1445
unix 2 [ ] STREAM 1441
unix 3 [ ] STREAM CONNECTED 1454 /tmp/nxserver_ipc
unix 2 [ ] STREAM 1449
unix 3 [ ] STREAM CONNECTED 2029
unix 3 [ ] STREAM CONNECTED 2024
unix 3 [ ] STREAM CONNECTED 3384
unix 2 [ ] DGRAM 955
unix 2 [ ] STREAM 1444
unix 2 [ ] STREAM 1440
unix 3 [ ] STREAM CONNECTED 1453
unix 2 [ ] STREAM 1448
root@vuduo2:/var/tmp#
Is there anyway to find out if it is actually working on thew plugins or if it's just hung in some loop or something?
Craig
Have just flashed from 5.1.033 to 5.2.001 using the image manager. I am at the point where it asked if I wanted to do a settings restore. I said yes to both settings and plugins. It has not been on the screen saying something along the lines of "Retrieving plugins please wait..." and has been on that screen for close to 40min now.
I can ssh into the system, but the /root/logs folder is empty. Lookin in /var/logs I see the following
root@vuduo2:/var/log# ls -l
-rw-r--r-- 1 root root 0 Sep 24 11:03 boot
-rw-r--r-- 1 root root 9807 Sep 24 11:03 dmesg
-rw-rw-r-- 1 root root 292 Sep 29 02:13 lastlog
-rw-r--r-- 1 root root 30054 Sep 29 02:30 messages
-rw-r--r-- 1 root root 36 Sep 29 01:28 postinstall.log
drwxr-xr-x 2 root root 40 Sep 24 11:03 samba
-rw-rw-r-- 1 root root 3456 Sep 29 02:17 wtmp
One thing I have noticed is the tz on the system is wrong, presumably in UTC. The messages file seems to mostly consist of the following
Sep 29 02:28:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:29:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:30:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:30:01 vuduo2 authpriv.info crond[3167]: pam_unix(crond:session): session opened for user root by (uid=0)
Sep 29 02:30:01 vuduo2 cron.info CROND[3168]: (root) CMD (/usr/bin/ntpdate-sync silent)
Sep 29 02:30:09 vuduo2 daemon.notice ntpdate[3172]: adjust time server 133.243.238.244 offset -0.047514 sec
Sep 29 02:30:09 vuduo2 authpriv.info CROND[3167]: pam_unix(crond:session): session closed for user root
Sep 29 02:31:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:32:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
Sep 29 02:33:01 vuduo2 cron.info crond[1046]: (readme.txt) ORPHAN (no passwd entry)
ad the postinstall.log file only contains these 2 lines
adding crontab
Configuring ntpdate.
Had a look at what processes were running and the package installer was listed, but had <defunct> after it's name. Not entirely sure what that signifies though.
1249 ? 00:00:09 opkg <defunct>
Really couldn't find much else apart from a file called ExtraInstalledPlugins in /var/tmp. It consists of
root@vuduo2:/var/tmp# cat ExtraInstalledPlugins
enigma2-plugin-skins-OverlayHD
enigma2-plugin-extensions-youtube
enigma2-plugin-systemplugins-IanSavOpenViXFeed
enigma2-plugin-extensions-netspeedtest
enigma2-plugin-extensions-epgrefresh
enigma2-plugin-extensions-tsmedia
enigma2-plugin-extensions-seriesplugin
enigma2-plugin-extensions-openwebif-terminal
enigma2-plugin-extensions-openwebif-vxg
run-postinsts
Lastly I decided to see what network connections were active. There does not appear be any back to any OpenVix server(s).
root@vuduo2:/var/tmp# netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 320 vuduo2.bsod:ssh BSOD.bsod:50597 ESTABLISHED
tcp 0 0 :::8001 :::* LISTEN
tcp 0 0 :::8002 :::* LISTEN
tcp 0 0 localhost:4200 :::* LISTEN
tcp 0 0 :::http :::* LISTEN
tcp 0 0 :::ftp :::* LISTEN
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::telnet :::* LISTEN
udp 0 0 0.0.0.0:mdns 0.0.0.0:*
udp 0 0 0.0.0.0:hostmon 0.0.0.0:*
udp 0 0 0.0.0.0:60816 0.0.0.0:*
udp 0 0 :::dhcpv6-client :::*
udp 0 0 :::mdns :::*
udp 0 0 :::hostmon :::*
udp 0 0 :::57701 :::*
raw 0 0 ::%4788280:58 ::%4953664:* 58
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 783 /var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 3154 /tmp/.listen.camd.socket
unix 2 [ ACC ] STREAM LISTENING 3156 /tmp/.listen.ciplus.socket
unix 2 [ ACC ] STREAM LISTENING 3196 /tmp/hotplug.socket
unix 2 [ ACC ] STREAM LISTENING 1451 /tmp/nxserver_ipc
unix 2 [ ACC ] STREAM LISTENING 3256 /tmp/hotplug.socket
unix 7 [ ] DGRAM 1998 /dev/log
unix 2 [ ACC ] STREAM LISTENING 2027 /var/run/avahi-daemon/socket
unix 2 [ ] DGRAM 3214
unix 3 [ ] STREAM CONNECTED 2030 /var/run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 1817
unix 3 [ ] STREAM CONNECTED 2023
unix 3 [ ] STREAM CONNECTED 3153
unix 2 [ ] STREAM 1443
unix 3 [ ] STREAM CONNECTED 2065
unix 2 [ ] STREAM 1447
unix 2 [ ] DGRAM 2046
unix 3 [ ] STREAM CONNECTED 1818
unix 3 [ ] STREAM CONNECTED 2064 /var/run/dbus/system_bus_socket
unix 2 [ ] DGRAM 2370
unix 2 [ ] STREAM 1446
unix 2 [ ] STREAM 1442
unix 3 [ ] STREAM CONNECTED 2066 /tmp/nxserver_ipc
unix 2 [ ] STREAM 1450
unix 2 [ ] DGRAM 2020
unix 3 [ ] STREAM CONNECTED 3383
unix 2 [ ] STREAM 1445
unix 2 [ ] STREAM 1441
unix 3 [ ] STREAM CONNECTED 1454 /tmp/nxserver_ipc
unix 2 [ ] STREAM 1449
unix 3 [ ] STREAM CONNECTED 2029
unix 3 [ ] STREAM CONNECTED 2024
unix 3 [ ] STREAM CONNECTED 3384
unix 2 [ ] DGRAM 955
unix 2 [ ] STREAM 1444
unix 2 [ ] STREAM 1440
unix 3 [ ] STREAM CONNECTED 1453
unix 2 [ ] STREAM 1448
root@vuduo2:/var/tmp#
Is there anyway to find out if it is actually working on thew plugins or if it's just hung in some loop or something?
Craig
↧
New in stock! Golden Interstar G-200 4K UHD Android TV Box IPTV Bluetooth WiFi
New in stock! Golden Interstar G-200 4K UHD Android TV Box IPTV Bluetooth WiFi.
Great spec IPTV and Media Player / Streamer!
Only £64.95 HERE!
From only £51.95 when purchasing 10x units!
Optional Airmouse Keyboard remote only £10.95!
NeStalker IPTV app exclusive to Golden Interstar!
Support for 16 IPTV Portals, Stalker, Xtream-codes, M3U List from HTTP Server & more!
1000's app's available via Googleplay store! KODI, Plex & more!
Amlogic Quad core 1.5GHz CPU!
2GB DDR3 RAM!
8GB eMMC Flash!
↧
[Formuler F1] No sound issue - on 5.2
Hi
I have flashed my Formuler F1 with the new openvix-5.2.001.release-formuler1tc.
But I'm having major issues with no sound outputting from the box.
If I flash back to 5.1 the sound works without any issues.
This occurs with and without a settings restore.
Totally confused. The settings that work on 5.1 are attached.
Please help.
I have flashed my Formuler F1 with the new openvix-5.2.001.release-formuler1tc.
But I'm having major issues with no sound outputting from the box.
If I flash back to 5.1 the sound works without any issues.
This occurs with and without a settings restore.
Totally confused. The settings that work on 5.1 are attached.
Please help.
↧
↧
[ET10x00] Client mode using VPN
Hi
I have being using client mode to stream from my main box (et10000) to 2 additional boxes around the house with no problems. I have just set up a VPN router and now my main box runs through this. Obviously, this gives me a new IP address. I have use this IP address on my other boxes but I get this error.Are there any other settings that I will to consider? IMG_3174.jpg
Thanks
I have being using client mode to stream from my main box (et10000) to 2 additional boxes around the house with no problems. I have just set up a VPN router and now my main box runs through this. Obviously, this gives me a new IP address. I have use this IP address on my other boxes but I get this error.Are there any other settings that I will to consider? IMG_3174.jpg
Thanks
↧
[Mut@nt] HD51 Disk initialisation order when waking up from Deep Standby
I've posted in the past about a problem with waking up from Deep Standby for a recording and not going back into Standby, but this problem I report here gave me a fright. :(
I flashed my Mut@ant with OpenViX 5.2.001 and rebooted, restored settings, installed e2iplayer which was not reinstalled as part of restoring plugins and thought all was well done.
Then thought of testing to see if waking up from Deep Standby worked as it used to some versions ago, so put it into Deep Standby and a couple of hours later when a recording was meant to have started I went back to it to see if it had succeeded to go into Standby, while it was recording a program. I was confronted with this error message:
I checked the settings to make sure Timeshift was assigned to use the /media/hdd/ drive and not a USB stick I have plugged in for PICONS. The settings were all correct. I looked at the list of recorded programs and then I panicked because all the recordings were gone, except for the recording currently in progress. :eek:
I also checked the Recordings settings to see they were assigned to the /media/hdd/ drive as they should be and this setting was also correct.
I stopped the recording and deleted the current timer, unmounted both spinning disk and USB stick and run fsck on both of them. The USB had a dirty bit set. I rebooted and all my recordings were restored. Listing the contents of the USB drive revealed it had been initialised as /dev/sda1 instead of the HDD and therefore it was being used for recordings and timeshift.
Any idea why this happened and how I can avoid this happening in the future? I am avoiding placing the Mut@nt into Deep Standby for now.
I flashed my Mut@ant with OpenViX 5.2.001 and rebooted, restored settings, installed e2iplayer which was not reinstalled as part of restoring plugins and thought all was well done.
Then thought of testing to see if waking up from Deep Standby worked as it used to some versions ago, so put it into Deep Standby and a couple of hours later when a recording was meant to have started I went back to it to see if it had succeeded to go into Standby, while it was recording a program. I was confronted with this error message:
Code:
Creating hardlink to timeshift failed!
The filesystem on your Timeshift-Device does not support hard links.
Make sure it is formatted in EXT2 or EXT3.
[Errno 1] Operation not permitted.I also checked the Recordings settings to see they were assigned to the /media/hdd/ drive as they should be and this setting was also correct.
I stopped the recording and deleted the current timer, unmounted both spinning disk and USB stick and run fsck on both of them. The USB had a dirty bit set. I rebooted and all my recordings were restored. Listing the contents of the USB drive revealed it had been initialised as /dev/sda1 instead of the HDD and therefore it was being used for recordings and timeshift.
Any idea why this happened and how I can avoid this happening in the future? I am avoiding placing the Mut@nt into Deep Standby for now.
↧
NeStalker IPTV vs MYTVONLINE
Whats the comparison of this box and the Formuler z7+ and also the comparison of their IPTV aps?
↧